|
|
Permanent
Researchers
• Gogolides, Evangelos
 |
Dr Evangelos
Gogolides has a Diploma in Chemical Engineering from
the National Technical University of Athens-Greece (1985),
an MSc (1987) and a PhD in Chemical Engineering (1990) both
from MIT-USA. His thesis work was on plasma processing and
plasma process simulation. He did research on microlithography
with Michael Hatzakis at NCSR “Demokritos”. Dr Gogolides is
an author of more than 100 publications and 7 patents, and
coordinator of several research projects on Next Generation
Lithography (NGL) and Nanofabrication using lithography and
plasma etching. He is now Director of Research at NCSR “Demokritos”.
His current research interests include micro and nano patterning
and simulation for nanoelectronics, MEMS, bioMEMS and micro(nano)fluidics,
as well as material surface nano-texture and property modification
for nano and nano-bio applications. He uses plasma technology
as an enabling technology for such applications. He was conference
program-chair for Micro and Nano Engineering Conference MNE-1997,
program and steering committee member of MNE, and conference
chair for the 34th MNE 2008.
Email: evgog@imel.demokritos.gr
Tel : +30 210 6503237
|
• Tserepi, Angeliki
 |
Dr Angeliki
Tserepi received the B.Sc. Degree in Physics from the
National and Kapodistrian University of Athens, Greece, in
1985, and the M.Sc. and Ph.D. degrees from the Ohio State
University, USA, in 1990 and 1994, respectively. Over the
period 1994-1996, she held a Post-Doctoral European Fellowship
(“Marie Curie”) at the University Joseph Fourier of Grenoble,
France, and at the Institute of Microelectronics (IMEL)–NCSR
"Demokritos", Greece (Return Grant, Training and
Mobility of Researchers) 1996-1997. Since 1997, she is with
IMEL working on plasma processing of materials for applications
in micro- nano-technology and microsystem fabrication. Her
current research interests include fabrication of microfluidic
devices and mechanisms for liquid transport, as well as micro-array
technology. She is the author and co-author of more than 50
publications in refereed international journals and holds
5 patents.
Email: atserepi@imel.demokritos.gr
Tel : +30 210 6503264
|
• Constantoudis, Vassilios
|
Dr Vassilios
Constantoudis received the degree in physics from
the Aristotelian University of Thessaloniki, Greece, in 1989.
Then, he continued his postgraduate studies in the Institute
of Theoretical and Physical Chemistry, National Hellenic Research
Foundation, Athens, Greece, where he worked on the theory
and applications of nonlinear and chaotic systems. He received
the PhD degree from the University of Athens, Greece, with
a thesis on the nonlinear dynamics of magnetic systems in
1999. After two years post-doctoral research in the National
Technical University of Athens, Greece, where he worked on
applications of chaotic dynamics to laser induced molecular
dissociation processes, he became a member of the plasma group
in the Institute of Microelectronics, National Center for
Scientific Research “Demokritos”, Aghia Paraskevi, Attiki,
Greece, where he is currently working. Since then, his main
research interest has been in the problem of roughness characterization,
formation, simulation, theoretical description and application
on nanoscale. He has investigated it in both microlithography
and plasma etching processes. He is an author of 40 publications
which have been cited by third party more than 100 times.
Email: vconst@imel.demokritos.gr
Tel : +30 210 6503267
|
Researchers On Contract
• Patsis, George
|
Dr George
Patsis received the degree in Physics from the University
of Athens, Greece, in 1995. Then, he continued his postgraduate
studies in the Institute of Microelectronics (IMEL) of the
National Center of Scientific Research (NCSR) DEMOKRITOS.
He received the PhD degree from the National Technical University
of Athens, Greece, with a thesis on the modeling and simulation
of electron-beam-lithography photopolymers, in 1999. Since
2001 he is a Research Associate in IMEL and has participated
in several national research projects. His research interests
are in the area of material and process modeling and simulation.
He is an author of more than 50 publications in refereed journals
which have been cited by third party more than 200 times.
Email: gpatsis@imel.demokritos.gr
Tel : +30 210 6503116
|
• Kokkoris, George
PhD Students
• Bayiati, Pinelopi
|
Pinelopi
Bayiati has a Bachelor degree in Chemistry from the
University of Ioannina (2001) and a MSc in Polymers Science
and their Applications from the University of Athens, Chemistry
Department (2003). She is a PhD student in National Center
for Scientific Research (NCSR) “Demokritos”. Thesis title:
“Plasma Processing and Modification of Polymers for the Fabrication
and Electrowetting Actuation of Microfluidic Devices”.
Email: pinelopi@imel.demokritos.gr
Tel : +30 210 6503264
|
• Boulousis, Georgios
|
Georgios
Boulousis has a Diploma in Chemical Engineering from
the National Technical University of Athens (2003) and a MSc
in Materials and Interventions of Preservation from the National
Technical University of Athens, Department of Architecture
(2005). He is a PhD student in National Center for Scientific
Research (NCSR) “Demokritos”. Thesis title: “Roughness formation
during Silicon plasma etching for microfluidic devices”.
Email: g.boulousis@imel.demokritos.gr
Tel: +30 210 6503267
|
• Kontziampasis, Dimitrios
|
Dimitrios
Kontziampasis has a Bachelor degree in Materials
Science and Engineering from the University of Ioannina (2004)
and a MSc in Microelectronics from the University of Athens,
Computing and Telecommunications Department (2007). He is
a PhD student in National Center for Scientific Research (NCSR)
“Demokritos”. Thesis title: “Micromachining of Polymers with
Plasma Etching for Bioanalytical Applications”.
Email: dkontz@imel.demokritos.gr
Tel : +30 210 650 3267
|
• Malainou, Antonia
|
Antonia
Malainou has a Bachelor degree in Material Science
and Engineering from the University of Ioannina, Faculty of
Science and Technology (2004) and a MSc in Microsystems and
Nanodevices from the National Technical University of Athens,
Faculty of Applied Mathematics & Physics (2006). She is
a PhD student in National Center for Scientific Research (NCSR)
“Demokritos”. Thesis title: “Patterning and chemical modification
of substrates for biochip fabrication in bio-nanotechnology
applications”.
Email: a.malenou@imel.demokritos.gr
Tel : +30 210 6503264
|
• Tsougeni, Katerina
|
Katerina
Tsougeni has a Bachelor degree in Chemistry and Petroleum
Technology from the Technological Educational Institute of
Kavala, Department of Petroleum Chemistry and Technology (2003)
and a MSc in Polymers Science and Applications from the University
of Athens, Chemistry Department. Thesis title: “Modification
of Polydimethylsiloxane Surfaces in Plasma Discharges” (2005).
She is a PhD student in National Center for Scientific Research
(NCSR) “Demokritos”. Thesis title: “Micro and Nano Modification
of Polymeric Materials for the Fabrication of Polymeric Microanalytical
Devices”.
Email: k.tsougeni@imel.demokritos.gr
Tel : +30 210 6503264
|
• Vlachopoulou, Maria-Elena
|
Maria-Elena
Vlachopoulou has a Bachelor degree in Physics from
the National and Kapodistrian University of Athens, Department
of Physics (2002). She is a PhD student in National Center
for Scientific Research (NCSR) “Demokritos”. Thesis title:
“Plasma-based patterning and surface modification of polydimethyl-siloxane
for the fabrication of microfluidic devices”.
Email: helen@imel.demokritos.gr
Tel : +30 210 6503264
|
• Vourdas, Nikolaos
|
Nikolaos
Ε. Vourdas has a Diploma in Chemical Engineering
(2001) and a MSc in Materials Science and Technology (2003)
both from National Technical University of Athens (NTUA).
He is currently completing his PhD thesis in National Center
for Scientific Research (NCSR) “Demokritos” on plasma processing
for selective etching and modification of polymers for microfluidics.
Email: nvourdas@imel.demokritos.gr
Tel: +30 210 6503267
|
Previous PhD Students (see
pdf)
MSc Students
• Kontakis, Konstantinos
(also Engineer for Technical Support)
Previous MSc Students (see
pdf)
Technical Support
• Kontakis, Konstantinos (MSc Student)
 |
Konstantinos
Kontakis has a Bachelor degree in Electronics from
the Technological Educational Institute of Lamia, Department
of Electronics (2006). He is a MSc student in National Center
for Scientific Research (NCSR) “Demokritos”. Thesis title:
“Fabrication and electrokinetic transport measurements in
microfluidic devices for analytic applications”.
Email: kkontakis@imel.demokritos.gr
Tel : +30 210 6503237
|
Administrative Support
• Kalpouzou, Maria
|
|
